When it comes to repairing household appliances, many are at a loss, thinking that it is easier to buy a new one. But sometimes it is worth trying to restore the device, especially if the new one will cost a decent amount. Today I will tell you the story of repairing an old refrigerator with your own hands. If you want to entrust such work to professionals, order household appliance repair in Oakville from A-Repair specialists.
A little theory about the Schrader valve
So, in front of you is not the entire refrigerator, but its compressor. My task was to solder in the Schrader valve. This is a small part, similar to an old Soviet nipple with a cap. Through it, you can fill the refrigerator with freon, check for leaks and perform other manipulations.
The Schrader valve is usually installed at the factory, but in household models it is often replaced with a sealed tube. That is why I decided to try to solder this valve myself to eliminate the problem of refrigerant leakage.
How it all began
My old refrigerator worked fine until I turned it off for the summer. When I needed to turn it on, it turned out that the freezer was not freezing and the food was spoiling. After checking the electrical part (it was fine), I came to the conclusion that the cause was a freon leak.
How to solder a Schrader valve yourself
Preparing the equipment. I needed a gas burner, special copper-phosphorus solder, and a Schrader valve.
Working with a tube. I filed down the edges of the tube so that the valve fit tightly inside, and removed all the dirt.
Soldering process. This is probably the most difficult stage. Using a burner, I heated the joint and carefully soldered the valve.
Checking for leaks. After soldering is complete, be sure to check for leaks.
I want to warn you: if your refrigerator uses a flammable refrigerant, it is better not to take risks and contact professionals. For example, order Oakville refrigerator repair - it is safe and effective.
Is it profitable to repair it yourself?
I spent (burner, valve, solder) on the repair. Of course, it is cheaper than buying a new refrigerator. But if you are not confident in your abilities, it is better to trust the experts. In addition, to fill the refrigerator, you will need freon and filling hoses, which cost several thousand more.
Conclusion: with a small investment and skills, I was able to restore the refrigerator. If you want to try - go for it! But remember about safety. If you are not sure, you can always entrust the repair to the professionals from A-Repair.
And if you are interested in the details of refrigerator repair, take a look at our article "
Fridge Repair Oakville ". There is a lot of useful information there!
